Solo Leveling - Baruka's Dagger

cults3d

This model is cut into 4 pieces to fit in my Ender 3 with platform size of 200mm x 200mm x 200mm. To get the pieces you want to print, please refer to the picture with pieces labelled to their file name attach in the preview section. I did include an uncut version as well just in case you want to cut it yourself. All the piece come with flat face that can lay on the printing bed easily. You can print in in upward position to avoid any "staircase" effect on the surface but will result in longer printing time and plenty of support needed. There are tunnels of 5mm in diameter punch on the model for alignment and bone installation purpose. Since the total length of the model is around 300mm-ish, you can skip using bone in this prop. You can print the file "peg4.5" if you can't find anything that can help you with the alignment. It is a cylinder with 4.5mm in diameter. Once printed pieces a and b, glue them back to back using superglue. Repeat the same for the other pair and join them together afterward. For scaling, please use the same scale factor for all the pieces. Cheers and Happy Printing!