Solid Edge Skills Showcase: Malabar 12 Ton Tripod Jack

grabcad

The Malabar 12 Ton Tripod Jack features a rated capacity of 12 tons (10.9 m. tons), with a side load of up to 15% of the vertical load. Its roll under height measures 46.8 inches (1,189 mm), while its low height is 46 inches (1,168 mm). The jack can be hydraulically lifted up to 38 inches (965 mm) and has an extension screw of 12 inches (305 mm). At full extension, the total height reaches 96 inches (2,438 mm). Under rated capacity, the oil pressure is 1,222 psig (86 kg/cm2), with a safety pop-off valve set at 13.2 tons (12 m. tons). Proof load capacity is 18 tons (16.3 m. tons), and the reservoir can hold 3.4 gallons (12.8 liters) of hydraulic fluid, preferably MIL-PRF-5606 or equivalent. The jack itself weighs approximately 7 lbs (266 kg). This model was created using Solidedge ST6 and rendered in Keyshot 5.0. For more information on the product, refer to the specification sheet available at http://www.malabar.com/pdf/product/tripod/sd8942A.pdf, or check out the standard casters from McMaster-Carr at http://www.mcmaster.com/#standard-casters/=12hxyn4.