Solder Fume Extractor - 120mm 120v

prusaprinters

A 120mm 120v solder fume extractor. fan specs. 120 x 120 x 38 mm (4.7 x 4.7 x 1.5 in.) 100 to 125V AC Airflow: 62 CFM Noise: 32 dBA Speed: 1800 RPM Dual-ball bearings have a lifespan of 67,000 hours and allows the fans to be laid flat or stand upright. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: .2mm Infill: 25% - 50% Filament: Hatchbox PLA Black Notes: Extruder 210c Bed 60c How I Designed This Remixed... to create yet another solder fume extractor I combined a couple different things, to come up with something I liked. The Filter housing and filter guard from The fan collar came from https://www.thingiverse.com/thing:3636749 When I first tried to print the collar the filament broke about half way through, however this proved to be useful still, since the final collar is made up of 3 parts; the original failed part, the complete reprint, and a small slice about 7 mm thick to make up the difference to reach a total of 51.5 mm in thickness. The bolts that came with the fan where used in the corners, and used M4.7 x 80 mm hardware to mount the filter housing and filter guard to the fan body. I cut the factory plug off the fan end stripped and soldered to the terminals, and covered with heat shrink. the inside of the 2 halves of the fan body needed to be clearance d with a grinding wheel to allow room for the wires to fit without getting pinched 120mm 110v muffn fan: https://www.amazon.com/gp/product/B07CZRKTBZ/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 Filters: https://www.amazon.com/gp/product/B07D5SBPN8/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 Category: Electronics