SOHO

thingiverse

SOHO 3D Print Suggestions • No Support Required • STL Files Have Been Successfully Tested at Both 0.2mm and 0.1mm Layer Heights • (Optional) For Enhanced Print Quality, Use Support Material for SOHO_Part3 • ABS and PLA Plastic Filament Have Been Proven to Work Successfully Assembly Remove Printed Parts from Print Bed Carefully Clean Up Parts as Necessary; Some Printers May Deposit Extra Material That Needs to Be Removed Immediately Press Fit SOHO_Part2 and SOHO_Part3 Together Snugly; Use the Two Pins on Top of SOHO_Part2 As Guides If Available, Find a Small Segment of Extra 1.75mm Filament and Proceed with the Next Step Cut the 1.75mm Filament into Four Small Pieces Approximately 10mm Long Press These Segments into Each of the Four Holes on the Bottom Surface of SOHO_Part1 Match Up the Holes in SOHO_Part2 with the Protruding Filament in SOHO_Part1 Press Fit SOHO_Part1 and SOHO_Part2 Together Securely For Extra Support, Apply a Small Dab of Super Glue Between SOHO_Part1 and SOHO_Part2