Soda Can Silencer Prop Adaptor

prusaprinters

<p>Pretty much just for fun, an item for aesthetics.</p><p>Little part to fit a standard coke can to an airsoft gun or airgun - files threaded for the standard airsoft M14 x 1.0 LH ("14mm CCW") fitting and airgun 1/2-20 UNF standard are included.</p><p>This is to make something that looks cool, rather than a real useful item. While a can might have a large air volume, and while there is an impact on the noise level, a drinks can won't really function as a very useful sound moderating device compared to any other design and should not be treated as such.</p><p>The ridge lines are just for gripping, I've added files which are smooth if you dislike these.</p><p>Most printers can print 70 degrees overhangs, so you probably don't need to print with supports. The actual angle is 68.5 degrees, which should be doable.</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Creality</p><p><strong>Printer:&nbsp;</strong></p><p>Ender 3 Pro</p><p><strong>Rafts:</strong></p><p>No</p><p><strong>Supports:&nbsp;</strong></p><p>No</p><p><strong>Resolution:</strong></p><p>0.2mm</p><p><strong>Infill:&nbsp;</strong></p><p>20%</p><p><strong>Filament:</strong> eSun PLA+ Black</p><p><br>&nbsp;</p><p><strong>Notes:</strong></p><p>&nbsp;</p><p>Most printers can print 70 degrees overhangs. If yours can, don't bother with supports.</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><p>Category: Sport &amp; Outdoors</p>