Sock blocker with neck extension

prusaprinters

This model is a modification of the original (v1) Sock Blocker by Mr. Cookie it replicates the connector used for the size extenders on the neck end of the blocker as well so that a neck extension piece can be added if required. The extension piece also includes a hanging eye.The sized toe pieces should be used from the original Sock Blocker by Mr. Cookie models. The middle part (double ended) was made to fit a Prusa Mk3 bed, there is also a 220bed version for smaller printers.This version removes the decorative vents in the original as the perimeters for these adds to the print time. It is recommended you don't print surface layers to reduce print times, except on the connector parts where the added strength is recommended (this can be done in the slicer examples of this are provided in the 3mf files). The blocker printed with 50% adaptive cubic infill without surface layers is still very strong.Print times on a Mk3s/PLA/0.2mm layer/50% infill (adaptive cubic) can be around 1h45m for the blocker and 1h for the neck extender if you only print surface layers on the connector part and just use infill on the rest.