Soccer (football) arena

prusaprinters

DescriptionThis arena design is based on a soccer arena in Munich (Germany). This model has three parts: 1. Roof; 2. Arena (without roof); 3. Base plate. 1.+2. are separated prints to reduce the required supports and to easily install the LEDs.2. has some space to include a LED stripe. I prefer 5 V to power it with a typical power bank or a mobile charging adapter.3. is only required, if you would like to install a LED stripe or to include the name of the arena (I removed the name and logo due to possible license problems ;) ).All parts are printed with Creality PLA (white). Printing parametersLayer height of all 3 parts: 0.08 mm (if you are not including a text in 3. you can easily increase the layer height)Supports: 1.: no; 2.: yes; 3.: yesInfill: adaptive cubic; 1.: 15 %; 2.: 15 %; 3.: 10 % AssemblyIf you are using a LED stripe: insert the stripe (LEDs facing inside; When you are placing the LEDs facing outside, you will only have some small light spots (less diffusion) unless you have a LED stripe with just a small LED separation.) I glued the LED to the outer wall of the recess. Drawback: You will get a low illumination area around the arena.  After installing the LED stripe. I glued 1.+2. together. After the adhesive has cured, I glued (1.+2.)+3. together.I also included the step files so that you can implement your ideas (e.g. text ;) ).