Soap holder 2.0

thingiverse

This is an advanced version of this project. Improvements to generation 1.0: - Update of the quick-change system to generation 1.2, which prevents the soap holder from unintentionally unlocking when the soap sticks. I designed a soap holder with Quick Change System in FreeCAD. The holder is attached to a quick-change plate, so it can be removed quickly and without tools for cleaning. The quick-change plate is fastened with 3 to 4mm countersunk screws or glued to a wall / flow with double-sided adhesive tape. It's essential that the adhesive tape has a drying time of up to 72 hours (3 days) depending on the adhesive, and the surface must be free of dust and grease. I printed the components from PETG. The small pins are glued into the holes on the back of the soap holder with one or two drops of fast-curing epoxy resin. The quick-release plate should be printed with four outer lines. For the soap holder, I activated support on the printing bed. I would be very happy about a small donation or a picture of your print, and I would be happy if you visit my other Designs.