Snowman - Easy Voronoi printing

thingiverse

Easy and fast design to print. This project takes around 3 hours, with a 0.15mm resolution on the Prusa i3 MK2S printer. No supports are needed. Here's my recipe for minimizing stringing on your Prusa printer: Start by setting the temperature at 215C for the first layer and 200C for all other layers. Then, adjust the Z-Lift to 0 mm. Next, set the retraction distance to 1.2 mm and the travel speed to 200 mm/s. Finally, slow down the perimeter speed to 30 mm/s.