Snow Shovel Replacement Handle

prusaprinters

<p>My snow shovel handle gave it up, so I searched the Prusa print catalog. I found a miniature shovel in 3 parts but the handle was about an inch long. With nothing to lose, it was upsized to human dimensions in a jiffy - and more important, sized to fit the 28mm handle on my shovel.</p> <h3>Print instructions</h3><p>Strength is everything for a shovel handle. I recommend printing in PETG or PC blend. Settings as follows:</p> <p>Support everywhere.<br/> Be sure to set support interface distance to .2mm (detachable)<br/> 30% infill = Honeycomb<br/> Perimeters = 10<br/> Brim because I printed in PETG</p> <p>To attach the handle, I drilled a 1/16 hole on both sides, and nailed the handle to the shovel shaft after printing.</p>