Snow Queen Flexy Arm II ENABLE

thingiverse

This prosthetic solution can only be adapted in a patient over 3 years old or an adult under the guidance of a health professional, therapist, physical therapist, physiatrist and with the help of a professional in psychology. Please read the safety manual and use of this prosthetic solution carefully first. Design Artist: Wilmer Garcia The mechanical concept is the work of Ing. Mecatrónico Christian Silva, a student from the National University of Colombia. SNOW QUEEN ARM II prosthesis is a project designed and developed by artist Wilmer A. Garcia P., a student at the National University of Colombia, and directed by Cristian Silva, Mechatronic Engineering PhD student at the National University of Colombia. The model is based on the Flexy arm of Christian Silva, The Flexy_Hand 2 of Steve Wood (Gyrobot), arm RIT (Rochester Institute of Technology) and e_NABLE work group. Work developed by the team e-Nable Colombia and the Foundation for 3D Materialization in Bogotá, with the participation and support of Recreartech in the process of 3D scanning and Realiza3D participation. All these files are covered by the common creative license attribution goods. Non-commercial, please use the reference to us if you want to print. All parents and children were informed about the study and research for the development of this work. For children aged 3-16, consent was explained by the principal investigator and signed by the children and their parents. Written informed parental consent was obtained in order to publish the pictures and videos that appear in the research study and research. Detailed safety guidelines were given to parents about the use and care of prosthetic arm. Detailed safety guidelines link: http://enablingthefuture.org/build-a-hand/safety-guidelines/ The fingers are printed on Flexy materials, hand, forearm, arm and other parts of PLA material. For more information on 3D Materialization, E-Nable Colombia and E-Nable Foundation: https://www.facebook.com/materializacion3d/?fref=ts Colombia - 3D Materialization / Bogota Foundation Printer Settings: Printer Brand: Prusa I3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 mm Infill: 80% Post-Printing Process: Once the prints are made, a process of thermoplastic formation is required. Heat the parts with a hot air gun to shape the corresponding flat pieces for the arms.