Snapmaker2.0 A150/A250/A350 Tool Box

thingiverse

Thank you for reading. The STL file below is a file published only on the homepage of "Turezurezasou". Reverse engineering of STL data, modification, redistribution, and sale of data are not permitted. Please note that we maintain the copyright and do not abandon it. If you would like to share this file, please include the URL of the public page of the following "Turezurezasou" homepage and share the link. https://www.blockmodule.com/archives/category/snapmaker Reprinting, modification, or description on the following "MakerBot Thingiverse" or similar STL distribution sites is not permitted. MakerBot Thingiverse https://www.thingiverse.com/ Reproducing, modifying, selling, or publishing outside of my public account is prohibited. https://www.thingiverse.com/blockmodule/designs Non Commercial -------------------------------------------------- -------------------------------------------------- -------------------------------------------------- --------- Toolbox for Snapmaker 2.0 Snapmaker Luban genuine slicer PLA Fast-Print infill density 15% or more Maintain strength with 100% infill for joints, or 20% or more infill with ABS / PETG other than PLA The joint part and the case hole are tight. If the clearance between the diameter of the joint joint and the diameter of the case hole is large, it will fall due to the cantilever moment, so please finish it by rubbing. The joints need to be firmly fixed with superglue except for the rotating parts. If you don't use a joint, you can use it as three storage cases separately from the main body case, and you can put the Middle Case and Upper Case inside the Snapmaker enclosure. Component_Body_Case.stl Component_Body_Cover_L.stl Component_Body_Cover_R.stl Component_Lower Row_Joint.stl Component_Middle Row_Joint.stl Component_Middle_Case.stl Component_Name_Plate.stl Component_Upper Row_Joint.stl Component_Upper_Case.stl -------------------------------------------------- -------------------------------------------------- -------------------------------------------------- --------- Written by: "Turezurezasou" https://www.blockmodule.com/ End Caps for Open V-Slot 2020 with Open Hardware logo. This is a remix from https://www.thingiverse.com/thing:398515