Snapmaker Laser Test - super simple

thingiverse

I'm Excited to Share a Simple Laser Test I Conducted Using Snapmaker Luban for My Snapmaker A350. This Test Wasn't Meant to be a Comprehensive Evaluation, So Don't Expect Miraculous Results. I'm Just Sharing It in Case You're Interested. It Includes Two Main Tests: Cutting Lines and Grayscale Squares. I'll Describe Each One Below: Cutting Lines: * The Laser Cuts Through Lines at 10% to 100% Power with a Speed of 140mm/Min. * It Takes Two Passes, with the Second Pass Being 0.6mm Deep. Grayscale Squares: * The Test Shows Grayscale Squares from 5% to 100% Black Using Both Stock Greyscale and B&W Settings. * I Used the Normal Quality Setting at 7 Dot/ Mm Speed of 500mm/Min for the Greyscale Test, While the B&w Test Was Conducted at 4 Dot/ Mm with a Speed of 800 Mm. The Test Was Done on 1.6mm Baltic Birch, and as You Can See from the Pictures, It Cut Through Cleanly in Several Tests.