Snapmaker GoPro Mounts (Second Generation)

thingiverse

This is a complete overhaul of my original Snapmaker GoPro Mounts (https://www.thingiverse.com/thing:2799487). I've added many more mounts, including bed mounts that will move along with the bed movements without interfering with leveling or reducing print volume. There are three main categories of mounts here: ## Base Plate Mounts These basic mounts need to be screwed in, and there are a few different angles to choose from: - Vertical - Horizontal - 25 Degree Offset - 45 Degree Offset All of these can be mounted along the axis rail using two screws or on the end cap of any axis using two or four screws. There are also two "Axis Edge" mounts that will mount over the edge of the end cap of any of the axis. These were primarily intended to be used with this: https://www.thingiverse.com/thing:2804539, but they'd surely be useful for other tasks as well. ## Heated Bed Mounts These mounts are designed to clip onto the Y axis under the bed. You'll have to remove the bed to mount these. There are three options: - Vertical - Horizontal - Right Angle If you use the Right Angle mount, there's an extension that comes with it that will extend the mount past the front of the heated bed and far enough forward to avoid your camera getting hit by the print head. There's also a 15 degree offset extension to angle your camera for a better view of your bed. You can use these mounts with the Laser and CNC bed if you print the shim, but you'll lose 1mm on the Y axis build volume. ## Laser and CNC Bed Mounts These are basically the same as the Heated Bed mounts but without losing 1mm and they're better secured by screws. If you don't have the 3D printer head or mostly do CNC and laser, you'll probably want these.