Snapmaker 2.0 A350 Spoolholders for 300mm and 200mm Spools
prusaprinters
additional spool holders for Snapmaker A350 Enclosure1x up to 300mm spools - left overhead frame mounting1x for smaller spools - rear left below frame mounting you need per holder 1 threaded rod M8, 115mm length and 2 M8 nuts, M4x16 cylinder head screws i use the holders with the following additional parts.https://www.printables.com/de/model/222371-spring-loaded-filament-spool-hub-for-snapmaker-20https://www.printables.com/de/model/334088-star-grip-sterngriff-m3-m4-m5-m6-m8-m10many thanks to the designers! note that for the 300 mm spoolholder mounting an additional M4 thread should be cut in the frame. an enclosure screw also has to be shortened (from M4x20 to M4x14) on the outside. (see photo)print the parts stable enough to carry the weight of the full spools.depending on your printer calibration it may be necessary to scale the parts minimally.
With this file you will be able to print Snapmaker 2.0 A350 Spoolholders for 300mm and 200mm Spools with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Snapmaker 2.0 A350 Spoolholders for 300mm and 200mm Spools.