Snap On Mini Hammer_Open Design

thingiverse

Hi All, Designed this up to be used on mini projects. At Home Making things where you would needs extra force to snap fit some parts or a nail. This is a cute little Snap on Hammer tool. Also After Snapping and assembling everything together use some sort of Super Glue because it might get loose if you snap on-off many times. Also You can post process it or not(It's totally up to you for look and feel). Printing: It doesn't need any support in general in certain areas where there is 90 degree over hangs but it should come out ok with almost no visible distortions. Spade - Please print this with above 70% infill because it is a hammer after all. I printed mine with above 80% infill. Although you can experiment with it for how light or heavy you want it. Orientation - Printing down side up is the best orientation less than 7% are there over hangs but it is almost non visible and will not result in material compromise. Material - I printed it with common P.L.A with approx 217C nozzle and 60C bed temperature. after preheating. This should come out very Clean. You can use any material like PETG, ABS, ASA, PLA or if you have any other composite material or even metal. Design: It is a straight forward design with Male-Female snap on design feature. With very Good Handle Grip. Weight: It's about 70 Grams, Time: it Depends How clean you wan't it. I will prefer you print it in the highest quality, since you will use it for yourself or use it anywhere you wish. Also you can gift it to any any who is curious about learning, no matter the age. Usually for Dynamic Quality it will take about 14 hours, Or if you play around with the settings it should come down to 12 or upto 10 hours but i will prefer it to be in the highest quality. Finish: It will come really clean. Seems are hidden inside , Almost no stringing , strong infill. Print it in PLA, PETG, ASA, ABS ULTEM or any material you have the best or in multi material or you can try this in metal if you wish. Best Of Luck. Please do share your Thoughts on this model. This is my first model here. Please suggest any improvement or any tool design you guys think i should do next. Also If you want to donate. It will be of great appreciation and help to keep on working, exploring, making, tinkering and experimenting. I am also learning Programming, Mechanical Science, Fluid Dynamics, Little bit Advn. Mathematics, Arduino, electronics and professional Cad modelling and also finding my spirituality. Share your thoughts and say Hi.. ~Regards