Snap-In Spray Can holder

prusaprinters

<p>Another night in my motorcycle garage and again no space left on the workbench.</p> <p>After an ice cold drink (I am from Bavaria, so guess what it was) I analysed why there is no space and what things I can store somewhere else.</p> <p>The result was, that I have to find a solution for the spray cans because they take too much space.</p> <p>A few evenings full of CAD and prototypes later, I had the result in my hands.</p> <p>--&gt; an easy to print and good working spray can holder where I can just snap the can in</p> <p>I found three main diameters in my spray can collection.<br/> Thats why I uploaded the .stl for all three diameters.</p> <p>My holders are screwed on to a 9mm multiplex plate with 4,2x13mm sheet-metal screws.</p> <p>I uploaded also a picture of the screw hole positions.<br/> With this positions the 66mm holders have a 4mm gap in between each other.</p> <p>Unfortunately I can not upload my Excel Sheet which calculates the screw-hole positions for the different holder sizes.</p> <p>Last word from my side:<br/> Happy printing ;-)</p> <h3>Print instructions</h3><p>Very easy to explain ;-)<br/> --&gt; Infill has to be 100% !<br/> --&gt; Layer height doesn't matter, the thicker the faster<br/> --&gt; no support required</p> <p>I printed the parts in PLA, but also PETG should work fine.</p>