Snap-In Filament spool wall mount for Dn40 / 1.5inch pipe

thingiverse

Surprisingly sturdy filament wall mount designed specifically for DN40 (40mm / 1.5inch) PVC pipe, allowing effortless insertion and removal of rolls as needed. The holders easily snap into place, making it easy to add or remove rolls without any hassle. To assemble the wall mount, print two separate copies of wallmount_solid_a3.stl, ensuring one is inverted for proper alignment. Alternatively, filament_wallmount_a3_solid_both.stl includes a mirrored copy, streamlining the printing process and allowing both sides to be printed simultaneously in one go. A3_plain.stl serves as the non-solid 123d export, providing an additional option for printing purposes. Print Settings Printer: Wanhao Duplicator i3 Rafts: No rafts are required for this print job. Supports: Yes, supports are necessary to ensure proper stability of the front hook during the printing process. Resolution: A resolution of 0.2mm is recommended for optimal results. Infill: 20% infill density is suggested for this specific design. Notes: Supports are only essential for the front hook; a small brim was used to prevent it from toppling over. For added stability, consider printing with two or three walls. This wall mount was printed at 210° in PLA material and yielded satisfactory results. filament_wallmount_a3_solid_both.stl can be printed in approximately 3 hours on medium settings.