SMW Fixture Plate Plugs (1/4" and M6)
thingiverse
These 3D-printable fixture plate plugs are compatible with our ¼" and M6 fixture plates. The plugs are designed to easily slip into the threaded fixturing holes and have a single Higbee-start thread at the top allowing the plugs to tighten in place with only a single turn of a hex wrench (1/8" for ¼" plugs and 3mm for M6 plugs). The small tapered head bottoms out just below the top of the fixture plate for a clean look that won't affect your parts and fixtures. Plugs should only be lightly snugged, otherwise the single thread will strip.We recommend printing with the hex- or slotted-side down and a layer height smaller than 0.10mm for best results (0.08mm seems to be ideal for the fine details of the thread). We do not recommend printing with a nozzle larger than 0.04mm. A 2mm brim and/or glue stick can help with bed adhesion.
With this file you will be able to print SMW Fixture Plate Plugs (1/4" and M6) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on SMW Fixture Plate Plugs (1/4" and M6).