SmoothQ Gimbal + Sony RX100(m5)

thingiverse

This is One More Adapter adapter enabling the mounting of Sony RX100m5 cameras on SmoothQ gimbals. The LCD remains inaccessible (although unnecessary with an external display and remote). Efforts were made to design this adapter as highly customizable as feasible. To assemble, you will need to print 4 (or 5) components plus: 1. 3x M3x12 screws 2. 3x M3 washers 3. 3x M3 self-locking nuts 4. 1x M5x33 bolt 5. 2x M5 washers 6. 3x M5 self-locking nuts 7. 3-4 large-size washers for assembling the balancing weight (I used 3x OD=36.6mm ID=13.1mm H=3.1mm, each weighing 21.5g) - the weight holders are designed to accommodate a total thickness of 4x3.1mm = 12.4mm; if four washers prove too bulky, use three plus one printed washer 8. Additional parts to secure the RX100 to the assembly (I utilized existing components) To fine-tune, you must assemble all components, mount the RX100, power it on (to extend the lens), and adjust all parts for optimal balance. Printed with ABS, 0.4mm nozzle, 0.2 mm layer, 4 top-bottom layers, 2 shells, 50% infill. Conclusion: excessive load on this gimbal causes resonance/noise; however, it remains usable. PS The door is open to 3D design collaborations.