Smoke Kit N-Filter Mounting Bracket - CS Prop Shop

thingiverse

This is a bracket to mount your CS Prop Shop Smoke kit into the Q-Pack MK3. Slight sanding/dremeling will need to be done to the inside if the pack wall to accommodate the corners of the fan on the smoke kit housing. I used 2 part epoxy to attach the bracket to the smoke tube. There are 2 holes in the bracket that you can use to mark where to drill on the smoke tube. I then used 2 small pieces of filament with epoxy as registration points in the holes to help hold the bracket in the correct position during curing of the epoxy. Then just snip the filament flush once fully cured. You then need to place the kit and bracket on the ledge of the N-Filter to once again mark where to drill. Proper positioning places these holes over a thick portion of the pack, lessening the chances of coming through the other side. I suggest marking your drill bit will tape to ensure you stop at the proper depth for your pack.