Smartphone & tablet charging shelf

prusaprinters

Tidily put your smartphone or tablet out of the way on this little wall-mounted shelf while it is charging. I mounted it above the worktop in our kitchen. This  avoids a mess of cables and devices on the worktop. It also keeps the devices safe from water spills.Shown in the photos is the regular version. There is also a wider (by 5mm) version, which allows for thicker phone or tablet casings.Required materials2 (or 3, but 2 should be enough) 3.5mm dia screws.Printing instructions I printed it with a 0.4mm nozzle and a 0.2mm layer height in PETG. Supports are not required. Gcodes for the i3 MK3S/S+ and i3 MK3S/S+ with MMU2S are provided.Assembly and mounting instructionsAttach the shelf to a wall using 2 (or 3) screws with a diameter of 3.5mm. I used the screwdriver which came with the Prusa i3, which was a bit of a squeeze to fit in the slots, but worked fine.For the cleanest look, hide the screws with the provided screw covers. Just press the cover into the cavity which holds the screw (see screenshot of the model).Done!Let me know if you like the model! :-)