Smartphone Stand #2 (V-shaped)
thingiverse
This is a very thin folding smartphone stand. [Remaining problem] The hinge part may loosen little by little when using it. When the smartphone is in this state, the stand moves to narrow the V-shaped angle and becomes unstable. [size] height: 21.5mm, thickness:6mm, length:68mm [screws to use] M3 CAP 18mm x1 It is recommended to use glue to prevent the screws from loosening. No nuts needed. [print conditions] -printing type: FDM -printer: Original Prusa i3 MKS -filament: PLA -support: yes -brim: no -raft: doesn't matter -print directions: please refer to the photo [revisions] 2022/03/28 I change the hinge shape. I'm sorry, the photos are still the old version. 2022/03/27 I change the print directions and I changed the fine shape. 2022/03/27 The top and bottom chamfers have been made slightly larger to make it easier to open. 2022/03/26 I made the length a little longer. And I narrowed the slot a little. 2022/03/25 I changed the shape of the hinge part a little. Sorry, this has not been print tested. 2022/03/24 A chamfer was added to the tip to make it easier to open.
With this file you will be able to print Smartphone Stand #2 (V-shaped) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Smartphone Stand #2 (V-shaped).