Smart Parts Ion - Magwell Adaptor

thingiverse

WORK IN PROGRESS This is a highly refined magwell design derived from an Ion project of mine, with more updates to come as this project evolves. To hold the magwell in place, M4 (or 5/32) machine screws are required. TiPX MAGWELL -No alteration to the breech necessary; simply bolt it on and you're good to go. -A small spring and a M3 screw are all that's needed. -Easier to build than ever before (recommended for beginners). -No FSR required. MILSIG MAGWELL -Substantial modification to the breech is necessary to allow the mag's follower to reach the bolt. -With enough filing and dremeling, FSR is achievable, but cut slow and take your time. -A cut guide is included as a reference point for what breech material must be removed. -The front barrel oring must be removed to make room, resulting in some air loss every cycle. -Under no circumstances should the rear oring behind the cut guide be cut. Print Settings Printer: Tevo Tarantula Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 50%