Smart Display-Box with kinetik arm, MicroSD-Cardholder and Reset-Safe

thingiverse

This is my Kinetic Display Holder for the Anet 12864 Display. It features a three-piece microSD card holder, a safer reset button, and a larger wheel for comfortable use. The arm of my older five-button kinetic arm holder is smaller than this one. You will need two M8 x 60mm screws, and two M8 x 40mm screws. For every bold piece, you will also need one shim and one blasting disc. A nut SW14 fits into the flange, while two other nuts are self-locking. In one of the display joints, I create an M8 thread, while in the other you can cut it yourself. Then you will need to create M3 threads in the display box or use screws where you have already cut them. Sorry for my English. The safe button plate for the reset button must be drilled with a 1.2mm drill bit. Also drill this into the mount before attaching. Then attach it to the box using plastic glue. The large wheel for the knob is very cool, and the small knob must fit with the pin. If you want, you can also fit an IGINIMIDI medallion or make your own. For the arms, make sure the wall thickness is better than 2mm. You can then fit a clock with a temperature display into the display box. Two arms are available: one with a 30° angle and the other with a 60° angle. This DIY clock kit can be found on Amazon for $10. However, you will need to solder it yourself. The document that comes with instructions is in both German and English, so please read it before building. In Cura, you must rotate certain things: Display Gelenk, Display Smart Final Tr, and Reset Safe. I hope I haven't forgotten anything. Have fun, greetings IGINIMIDI. UPDATE 25/06/2017 I have made a better reset button safety feature. Now you can flip the button after opening it, making it easier to push than the older version. See the new picture. It feels like starting an ICBM! New files are available: Reset Safe Block Full STL Reset Safe Block Taster STL Please be careful when drilling these small pieces.