Small v3 3M 6000/7000 respirator cap

thingiverse

Faster Print Time: V3 is Up! Now, English Description: Middle Support Layer with Preserved Paper Effects Slicer Settings: - Open mouth downwards - Use support (touching the build plate) - Do not use brim or raft - 0.2 layer height - 1.2 shell thickness - 0.8 top and bottom layers - 20-30% infill rate (100% infill may cause printing failure) - Enable support (touching build plate) - No bed adhesion Flow Rate Adjustments: - Increase flow rate by 1-5% - Use higher temperature for PLA print (10-20 degrees Celsius above usual) Printer Settings: - Ensure accurate extrusion steps per millimeter - Lay plastic wrap first, then assemble printer - Place mouth downwards and use support (touching build plate) - Verify E-steps and flow rate settings Recommended Materials: - Use hard filament (normal PLA is acceptable) - Print at 0.2 layer height - Shell thickness: 1.2 mm - Top and bottom layers: 0.8 mm - Infill rate: 20-30% - Enable support (touching build plate) - No bed adhesion