Small USB Stick and Micro-SD-Card Holder

prusaprinters

<p>Just a small USB stick holder which I have designed since other designs took too much space on my desk or where not of my taste.</p> <p>The back is designed to take a counterweight if your USB sticks are too heavy. A small stack of coins works very well.</p> <h3>Print instructions</h3><p>Print the front part with a brim. Otherwise it will be difficult to make it stick to the print bed. Be shure to align the bottom flat to the surface. No supports required.</p> <p>For the main part there are two versions:</p> <ol> <li>Without cap storage: Does not need support</li> <li>With the cap storage: Requires support for the cap storage extrusions</li> </ol> <p>Print both parts in the colors of your liking and glue them together. The easiest thing to do is to put glue on the main part and put it on a non stick surface. Press the front part on it so that the bottom rests on the surface as well. The bottom of both parts should be aligned perfectly after drying.</p>