Small delta endstop bracket
prusaprinters
I designed this endstop bracket to maximize the print volume height of my Kossel XL printer. Original bracket had an adjustment screw which is unnecessary as the endstop adjustment is far more convenient and accurate to be done in software anyway. There's a hole for the adjustment screw in this design nevertheless, can be used for adjustment, ancillary mounting or leave unused. This fits an endstop that has two mounting holes, centers 19mm apart and max 5mm from the edge. Intended for use with 2020 profile, but can be used with other profiles by removing the (unnecessary) latches. Print Settings Printer: Kossel XL Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: Doesn't matter Infill: Doesn't matter Notes: Printing orientation: Sides of latches on the bed surface (as the Thingiview preview orientation). Post-Printing ============= Drill (2.5mm) and tap (M3) the endstop mounting holes and also the ancillary mounting hole if used. Drill the mounting hole to 4-4.5mm to accommodate M4 mounting screw. Category: 3D Printer Parts
With this file you will be able to print Small delta endstop bracket with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Small delta endstop bracket.