small Darkroom Film Drying Unit for Paterson Spools

thingiverse

You need: 120mm Housing Fan, either 12 or 24V Superglue for PETG or Acetone for ABS A 12 or 24V Power Adapter Socket to match your Power Adapter 6 tapping screws, 2.9 x 16mm, for the "Housing Without Filter" 4 threaded inserts, M4x6 Type 303 or similar 4 countersunk screws, M4x30 Filter Mat Class G4 filter mat Drills for threaded insert holes and power socket - Assemble the two "Housing Without Filter" parts together. - Install the threaded inserts in the front of the Casing. - Secure the Fan and the "Ventilatorhalter" to the threaded inserts. - Glue the "Adapter" and the "Dry Tube" together. - Cut the filter mat for the "Filter Slide". - Insert the "Filter Slide" into the "Filter Cover" and push the "Filter Cover" over the "Ventilatorhalter". Push your well-rinsed Film with the Paterson Spool over the "Spool Holder" and place it in the "Dry Tube". Start the Fan, and 30 minutes later, the Film is dry.