Small control horn - suits 6mm foam and ~1.2mm pushrod
thingiverse
Small control horn for 6mm deep foams and 1-1.4mm diameter pushrods. I typically use 1.2mm diameter and can't guarantee anything above 1.4mm will work. **The dimensions are the height of the holes above the surface of the FOAM when installed.** Using a typical 9g servo with my clamp mount, the pushrod is 18mm above the surface of the foam. Therefore a 18mm hole height gives a control range approximately equal to the travel of the servo. Installation: First ream the holes out using the pushrod - easier to do this before gluing in place! Cut a slot to match the position of the horn. Fill with hot glue or equivalent and press in firmly.
With this file you will be able to print Small control horn - suits 6mm foam and ~1.2mm pushrod with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Small control horn - suits 6mm foam and ~1.2mm pushrod.