Small Bird House

thingiverse

This is a birdhouse for small birds that can be disassembled into three parts with threads.The body is made of PLA and the roof is made of PETG.I used "ISO Pipe Threads" for the threads.The diameter of the entrance is set to 28 mm, which is a suitable size for a titmouse.The size can be changed by using attached STEP file."Fuzzy Skin" option is used for printing.I have uploaded CURA 3mf file for your reference.The skin is set to be coarser than the standard Fuzzy Skin setting of CURA.I used support blockers (*) to prevent Fuzzy Skin from covering thread. Roof does not need support blockers, but Fuzzy Skin should be set the same as other parts.How to add Fuzzy Skins for body parts.Add "Support Blocker" and Select Mesh Type for "Modify settings for overlaps".Size: X,Y,Z=200,200,100Position: X,Y,Z=0,0,0Select "Cutting mesh" and add settings for "Fuzzy skin".Fuzzy Skin: YFuzzy Skin Outside Only: YFussy Skin Thickness: 0.5mmFussy Skin Density: 1.25 1/mmFussy Skin Point Distance: 2.0mmAfter the printing, water-based waterproofing paint was applied, but it may not be necessary.