Slug trap

thingiverse

Each 3MF file contains two parts, you need to rearrange them to lay flat.All inclinations to not got below 30° so parts could be printed without supports (although inner side will not look smooth but who matters 😄).The top can be secured with four ⌀2×10 mm screws.The inner volume is supposed to be filled 50% with beer, and whole trap to be digged into the ground for 2/3 of the bottom part height.Dimensions (D×H):Large slug trap: ⌀100×90 mmSmall slug trap ⌀80×70 mmP.S. Inspired by this model but my model has inclined walls and screw holes.