SLS Block 1

prusaprinters

Support Me       Support my work by subscribing to my Printable club to have access to my new model, my first lander, the Titan 3C.     You can also have access to the multi-material version of the SLSUPDATES:17/02/2024Stand redesigned with two versions, AMS/MMU and Multi parts.Description     The "Space Launch System" model is a highly detailed 1:200 scale reproduction of the rocket currently under development by NASA for the Artemis missions to the moon; the first and only test flight took place in November 2022. The model consists of several pieces printed separately, which are easy to print and assemble.The finished model dimensions are approximately 50cm high and 10cm wide for the Space Launch System.There are 64 pieces to print, including 13 pieces for the Solid Rocket Booster and 17 pieces for the Core Stage. The total printing time for the entire model is approximately 40 hours.TipsSettingsFor infill, 10% is sufficient for a decorative object, and you can also use PrusaSlicer's "Lightning" infill settings. For some parts, support will be necessary.PrintingFor a better final result, I recommend printing the Jonction_Block last so that you can adjust their size according to your print and have a better fit during assembly. If some parts are loose or don't fit, you can change the scale by +/- 1% in the slicer to get a better fit. The parts are positioned in the optimal direction for printing. For the base, it is recommended to print with 4 perimeters to avoid visible infill.Post PrintingYou may need to sand the junction areas between the parts for a smoother finish.