Slot Machine

cults3d

Three reels, one line slot machine powered by a rubber band. Let the games begin. Even odds for every symbol. This design does not require a coin in order to work. Bet your friends, pull the lever and let it spin. Only 4, M3 screws required for the back cover, and a one fairly strong rubber band. Print: 1x SLOT_body 1x SLOT_shaft 1x SLOT_shaft_plug 1x SLOT_handle 3x SLOT_reel 1x SLOT_reel_shaft 2x SLOT_reel_shaft_plug 3x SLOT_reel_spacer 1x SLOT_cover Print the PDF file for the slot symbols on a sticky paper (regular a4 sheet will work just fine as long as you use glue). After printing all of the components, assemble the reels on the reel shaft (LEFT TO RIGHT: spacer-reel-spacer-reel-spacer-reel). Use your seam as a starting point for the slot reel symbols. (glue the symbols starting from the bottom towards the "7" as there is an overlapping space) Insert the reels in the slot body, and secure it in place using the two plugs. Wrap a rubber band around the shaft and loop the rubber band around the designed notch. Insert the shaft in slot body and secure in place using the shaft plug (on the left side) and the handle (on the right side). Put the back cover and secure with 4 screws, and let the fun begin!