Slim Raspberry Pi Zero W2 Snap-fit Case

prusaprinters

<p>Marius' really nice <a href="https://www.prusaprinters.org/prints/84138-pi-zero-2-slim-case">Zero W2</a> case model only comes with a screw-fit back, whereas their <a href="https://www.prusaprinters.org/prints/32485-slim-raspberry-pi-zero-w-case">Zero W</a> case comes with either snap-fit or screw-fit backs. I tried using the back from the latter model but the pegs were slightly too large (~2.4mm). So I redid the pegs to be a little smaller (2.2mm) and the back now snaps in nicely to the Zero W2 case.</p><p>If you don't want the Raspberry Pi logo on your case just use one of the other models from Marius' original. I haven't modified the lid at all; it's included here just for convenience.</p><p>For printing, I opted for 1 perimeter so the details on the Pi logo come out more clearly, and 100% infil for the back to improve the sturdiness of the pegs. It's just cosmetic, but I also used Octagram Spiral bottom infill, which I think came out nicely.</p>