Slim Quick Release connector adapter

thingiverse

This thing adds a 15 pin VGA connector to an eBay Quick Release slim type for your simulator. With a VGA 15 pin connector, you can use the original cables and add an extra USB for an Arduino card, etc., so you can add buttons or a screen to your steering wheel. Print this out in PLA or ABS. You will need to use a 6mm drill bit and make room for countersunk screws so they sit flush with the thing for the VGA connectors. If not, there won't be space for them. Use four M3x8 Countersunk screws. Use four M3 nuts to secure the four countersunk screws. Use two M3x8 countersunk screws to connect wheel part 1 and 2. If the screws don't fit when printed, drill with a 2.5mm drill bit where wheel part 1 and 2 will be screwed together. All other holes use a 3mm drill bit. To connect this to the Thrustmaster base, go to my base part: https://www.thingiverse.com/thing:2781811 Shopping list: * eBay quick release slim type * Male and female 15 pin VGA connectors (solder type; RS232 serial connectors should also work) * Six M3x8mm countersunk screws * Four M3 nuts * Wiring for the VGA connectors to the sim base and whatever you want to connect to your steering wheel, Arduino for buttons, screen or whatever... Update: * Wheel part 1 and hub part are now ready for countersunk screws. * All files are scaled correctly (if you have the old files, they need a 1000% scale in Cura). * A cable holder has been added so that you don't twist the cable; secure it with a zip tie. Wiring examples can be found on my blog: https://mortenstechcave.blogspot.com