Slim LED Panel Lamp set (Round-shape Down light) - DIY Frame with Snap-type Holder/Hanger (Wanhao i3 and Large Bed Printer)

thingiverse

Low-cost Desk lamp or Indoor/Outdoor Portable Lighting for temporary uses are available in various forms, including LED Flat Panel lights (Down light) that have recently entered the market. I applied several of these innovative designs as my desk lamps (9 Watts), utilizing their efficiency and versatility. The frame and lock/holder for 1-Inch Pipe were designed to be compatible with this setup, allowing users to hang only the frame into some poles. These custom-designed parts contain 6 STL files (updated) that cater to various needs: * Two LED Round Panel frames (5" and 6") can be printed with no support. * The dimensions of these frames are 293mm x 184mm, which can fit a bed size of approximately 30cm. In addition to the frames, users will find the following parts in the STL files: * A 1-Inch diameter pipe lock/holder/hanger that requires printing with support. * The dimensions of this part are -140mm x 120mm and can be printed on a Wanhao i3 printer. Two separate files for the LED Round Panel frames ONLY (5" and 6") are also included, which can be printed with no support. These parts have dimensions under 20cm x 20cm and can fit a mid-sized bed like the Wanhao i3. The final part is an LED Frame Arm that requires assembly with 2 Nuts & Bolts (5mm Diameter). The dimensions of this part are 190mm x 170mm, making it suitable for printing on a mid-sized bed such as the Wanhao i3. To assemble and use these parts, users should print them and then apply rubber band(s) to the Holder part as Anti-slip to snap onto the pipe. The frame can then be placed in its slot. This portable lighting solution is designed to be versatile and can be used anywhere needed. **Print Settings** * **Printer Brand:** RepRap * **Printer:** CR10, Wanhao * **Rafts:** No * **Supports:** Yes * **Resolution:** 0.2 / Layer * **Infill:** 15% **Notes:** For the Snap Lock to function effectively, users may need to experiment with different printing orientations, as this affects the strength of the hook. **Post-Printing Instructions:** 1. Use rubber band(s) as Anti-slip. 2. Place the frame into the holder slot. 3. Enjoy your newly assembled lamp!