Slim Bowden E3D v5 mount for Prusa i3 with fan shroud and LED ring

thingiverse

The design delivers maximum Z and X height, minimizing vibration in the Z direction due to its compactness. The spotlight generated by the LED ring significantly enhances visibility of the print. E3D v5 mounts with Ø25mm heat sinks are paired with a standard Prusa i3 x-carriage featuring 30mm hole spacings. The 30mm fan is embedded for maximum space efficiency, while the open right side enables unhindered heat dissipation from the heat sink. The heat sink snaps securely into place without requiring additional support; I added an optional clamp that can be screwed in if needed. Furthermore, this mount accommodates a 40mm LED ring, which can be glued or screwed to the recessed area at the bottom. Find more options here: http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0.X40+mm+led+ring&_nkw=40+mm+led+ring&_sacat=0 Visit Droopas at http://droopas.blogspot.com for further details. Print Instructions: Print using ABS or PLA materials with around 30% infill density. Employ support settings (especially "Touching buildplate" if utilizing Cura software). Use a 0.4mm nozzle. Set the layer height to 0.2mm. Install your hotend and a 30mm fan by snapping them in place. Secure the mount to the x-carriage using M3 bolts and nuts.