Sliger Cerberus Rear Plate

thingiverse

I have a Be Quiet Dark Rock TF 2 Cooler on my motherboard in a Sliger Cerberus X case. The heatpipes are oriented to the top of the case, it's the only way they fit on my motherboard without coming into contact with the video card in the top PCI-E Slot. The problem is that there is no clearance for the plug mounting in the plate adapter in its natural position at the top of the plate. For the longest time it just dangled outside. So I designed this plate to shift it to the bottom right of the plate where there's sufficient clearance with the cooler to run the power cable to the SFX-L PSU mounted at the front of the case. I printed this in PETG no infill to make it a little rigid (it's 2mm thick), but it's probably not necessary and is not a mechanical part. If you wish to mount a fan or something to the sliger pattern grill, just print it with no infill. I tried to copy this as close as I could to the original, the powder coat made the measurements be off and I had to make some adjustments. The first version I printed, the lower right screw hole didn't match up and the right most plug mount hole overlapped with the metal behind it. I moved it down 2mm for the lower right screw hole and moved the plug over 4mm. You may want to print this version at your own risk for these small adjustments. For anyone with a Sliger Cerberus X, I hope this helps. This should probably work on the normal Cerberus case as well.