Sliding legolini Ironsight and front grip

cults3d

15/11/2020 Update: Adding ##_Clearnace to add some clearance and ease the assembly if the standard part are too tight 14/11/2020 Update: Adding 17mmRail to add some clearance and ease the assembly if the 16mm parts are too tight. 15/04/2020 update : Adding a front grip without suppport pilar. 11/04/2020 update : The ironsight_V2_Arimute is now longer to have a proper high aiming. The grip is now more confortable A custom release witch I like better, for 3mm and 4mm screws A 16mm rail compatible is made available 10/04/2020 update : The ironsight_V2 can now be tuned. a M3x25mm srew is required. 08/04/2020 update : improve the front grip. it is now tighter and holds much better in place Those are a simple sight and a front grip, used as a tension reliever. They improve dramaticaly the aiming. They can be attached directely to the sliding legolini designed by :jaaanik https://www.thingiverse.com/thing:4210059 The front grip has a notch to protect the finger from the arrow. Both elements share the picattiny rail. Two M3 screws are required to lock them in place. There is a pylone on hte front grip which can be cut after printing, it is used to have a easier print. Pink color is not mandatory, but it makes it easier to see what's what on the potos :D