SlideLight Nightlight

cults3d

This is a copyrighted file and is to be used for personal use only. If you wish to sell please contact me for written permission. This was created for my granddaughter to be able to switch out her nightlight to have different pictures when she wanted. There are two different files, one is for the thin slot type nightlight and the other is for the thick slot. I was unable to find the manual switched nightlights with the thin slot and developed the thicker slot because of that. The reflector is printed separate from the base. The base can be printed in any color. Reflector is best when printed in white or clear filament. After inserting the nightlight you will slide the reflector on. The lithophane is made flat and must have a 4mm frame width/depth. The frame thickness/frame Base height is at least 4mm. Height of the lithophane should be 3 1/2 inches to 5 inches. Width can be up to 6 inches but, be aware the wider, the less light that will get to the outside edges. The lithophane will fit tight but will loosen and be much easier to slide with use. It is advised if you use a bulb type nightlight you only use LED bulbs as heat from incandescent bulbs could melt the SlideLight. LED nightlights are best. The reflector was created to direct the LED light. You can use the lithophane program of your choice. This is the one I would recommend for a beginner in lithophane. https://lithophanemaker.com/Framed%20Lithophane.html This one you can download a color picture to print and glue on back making a color lithophane. https://tool.itslitho.com/CreateModel Thick type nightlight : ttps://www.amazon.com/dp/B08JD7DZFY?psc=1&ref=ppx_yo2ov_dt_b_product_details Thin type nightlight : https://www.amazon.com/dp/B00IXWYR42?ref=ppx_yo2ov_dt_b_product_details&th=1 At the bottom of lithophanemaker.com on the nightlight page you can find links to the nightlights the Slidelight will work with, also a link to filament for lithophanes. https://lithophanemaker.com/Night%20Light%20Lithophane.html