Slide Projector - Visio like

thingiverse

HI there! This is an upgraded version of the Visio Slide Projector found on Kickstarter some time ago. Print the parts as they are with 0.2 mm in PLA, no support needed. Everything else you need is included. Semlos LED emits 5000 lumens with 12 LEDs. Amazon link: https://www.amazon.com/dp/B07PCR77PG/ref=ppx_yo_dt_b_asin_title_o01_s03?ie=UTF8&psc=1 You will also need: * One old 52mm UV filter, cut from metal and ground on a whetstone until opaque for better light distribution * Five M3 6mm screws * One M4 15mm screw * White spray paint * A rubber band * Black tape * And a Nikon lens - 50mm 1.8 or 1.4 works great Assembly: Remove the top of the lamp, take out the reflector and spray it white along with the inside of the "front" and "back part". Insert the reflector, glass, and transparent o-ring, then push in the "back part", securing it with the "ring part". Secure the opaque glass with a small piece of rubber and place a piece of tape on the upper rim as shown in the pictures - this minimizes light leakage and prevents the slide from falling out. Screw on the "front part" and attach a Nikon lens, securing it with an M3 screw. After attaching and detaching the lens a few times, the printed F-mount will wear slightly out, so you'll need to use the screw provided. I hope you enjoy this project! Have fun building it!