Slide projector for Godox H200R head of AD200 flash

prusaprinters

<p>This project is a slide projector for the Godox round head of the AD200 flash.&nbsp;<br><br>I print with PETG for decent strength and temperature resistance. PLA would probably be problematic. I printed it with full supports, 0.2 mm quality setting on Prusa Mini, 15% infill.<br><br>To couple it with lenses I used 10mm E Sony mount extension tube and then I can use pretty much any lens that can be adapted to Sony E mount. Unless you can find the same cheap extension tube this part of the model may need rework. To assemble I removed the backplate of the extension tube and replaced it with my piece using the same bolts and holes as the backplate.<br><br>On the rear end I added chamfer that allowed me to put some soft material for tighter fit with the flash head. I glued the soft material using acrylic glue.</p><p>The slide cutout not be cleaned well enough from the support material so thick plastic slides do not fit. One can widen the cutout if needed.<br><br>I printed my gobos on laser printer using A4 presentation film for laser printers. The gobos pdf is attached - I made these in affinity designer. &nbsp;The laser printer is not ideal as the structure of the print is coarse and becomes visible when you magnify enough.<br><br>I am overall satisfied. It would be great If I find better gobos. Possibly I will re-print with a bit wider cutout for slides as to fit standard projector slides.</p>