Slide-in Wyze Cam Prusa Mount

prusaprinters

<p>1/5/2020 - Added 8mm channel version. Added a version to clip onto the BEAR upgrade extrusion.<br/> 9/11/2020 - Added Right Hand version per comment request.</p> <p>(Works for MK3S and the Mini.)</p> <p>I decide to do my own spin on Gabe's awesome cam mount. A couple of features I wanted to add was a more secure fixture for the camera and I wanted my USB cable to go under my printer, so I wanted some cable pathing/clips.</p> <p>I added a slide-in for the camera itself, this way it sits nice and snug while still allowing full adjustment and rotation.</p> <p>I added a cable opening on the bottom and a clip in to keep the cable in place. The cable can be snaked in through the mount openings to keep it out of the way.</p> <p>Overall it's an easy print, takes about 2hours on 0.3mm layer height and prints without supports.</p> <p>Setup is easy. Slide the camera in, snake your cable through the openings and clip and plug it in.</p> <h3>Print instructions</h3><p>Easy print, any material, I did it in PLA.</p> <p>0.3mm layer height but 0.2mm should work just fine as well.</p> <p>No supports needed.</p>