slide-in connectors for standard extrusions

prusaprinters

<p>Little slides that go into the middle rail of an extrusion and serve to attach something to it.<br/> Like, when you want to attach something to the x-gantry, a hook to hold the cable tube up, or a cam.</p> <p>One has a M3 screw hole so you can fix something on it by screwing it in. The other has a vertical hole with 7,4 mm diameter which happens to hold a cylindrical endoscope camera I had with a 7,25mm diameter. It holds the cam though not very tight.</p> <p>The cam points down to the extruder now which is not very exciting but it was the one angle I had not covered by the the cams at the back and on the X-axis.</p> <p>FreeCAD sources are included so you can modify the things as you like and make it a part of your project if you like.</p> <p>Everything is very light weight, I printed it with support (to build plate) and 3 perimeters, 15% infill. If you put something heavy on it you may want to increase that.</p> Category: 3D Printer Accessories