
Sleeve-Style GoPro Session Mount for Apex, iFlight, Screech - Uses 20mm Standoffs
thingiverse
### Sleeve-Style GoPro Session Mounts for Apex, iFlight, Screech - 30° Camera Angle. - Use 20mm Standoffs for "sleeve". - Use 8mm M3 screws. - Recommend nylon washers for mounting "plate" to frame. ### Versions - "Normal" is about 2mm thick around GoPro - "Thicker" is about 3mm thick around GoPro - ImpulseRC Apex - Tested on 6" Clone. - ImpulseRC Apex - with added bracing. - ImpulseRC Apex - FlatPrint version(s). - iFlight XL Series - Tested on XL7 v3. - Strix Screech Freestyle - not yet tested, but old/derivative versions worked. ### Why - Mount needed more material (meat) in the standoff loops to avoid breakage. ### Observations - Sleeve will not eject GoPro - FlatPrint version is the best and stiffest, so far -- will not rip mount at adhesion layers like vertical-prints. (Caveat, may still rip at screw-holes) - It is a bit difficult to remove GoPro from sleeve. Removing GoPro usually triggers rear button even though not directly pressed due to amount of pressure needed to push on GoPro. - The original sleeve designer reported that the mount is not in-view even in superview; however, i do see a small amount. My Gopro is a refurb model, fwiw. ### Printing - GoPro Sleeve needs supports -- about 25° to 30° or as desired - Print components with 100% solid layers or 100% infill to your preference. ### Photo - Left is slightly under-extruded Apex with minor print fail at top-most. - Middle is iFlight XL and "normal" sleeve - Right is "Thick" sleeve - SuperView visibility; YMMV - Apex - Thicker sleeve and FlatPrint version of the plate-mount. --- ### A little show of appreciation goes a long way. - If you enjoy this, please "Like" or comment. - Please post "Makes". - Feel free to promote it using the [attribution card](https://www.thingiverse.com/thing:5177455/attribution_card). - Please consider subscribing to my [Youtube](http://youtube.com/c/nerdCopter). - All my works under the `Creative Commons - Attribution - Non-Commercial - Share Alike` license unless otherwise noted. - Free to print for yourself or your friends. Please do not commercialize without consent or agreement. - If this is a remix, please follow original designer's limitations as well. - HUGE thanks to 2Scoops of Crazy and BrockLee FPV for my Creality Ender 5 win!!! - https://www.youtube.com/channel/UCPOiGyt_yti0vBQwG32wvcQ - https://www.youtube.com/c/BrockLeeFPV
With this file you will be able to print Sleeve-Style GoPro Session Mount for Apex, iFlight, Screech - Uses 20mm Standoffs with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Sleeve-Style GoPro Session Mount for Apex, iFlight, Screech - Uses 20mm Standoffs.