Slat Mount For Matx Motherboards

prusaprinters

designed for slat-wall at work to allow for interchangeable cloning machines. should be compatible with most slat-wall designs.a few parts you will need to buy/have.-motherboard standoffs (i used m3)-screws-and heat inserts-drill-something to mark the print with. steps to make your owntake print and put motherboard against it.mark out locations for where to drill based on motherboard mounting positions.drill holes and use a soldering iron to install heat inserts. i used a smaller bit to start.make sure all the inserts are straight and lined upinstall the standoffs, doesn't really matter on length.screw motherboard to plate (not to tight just want to make sure its snug.)parts used-insert m3x8x5mm 6-standoffs m3x5 6-screws m3x5 6print settingsEnder 6 (print fit on modified ender 3v2 barely)200C PLA creality white filament60C bed20% gyroid infill.  for power button is used a cherry mx switch i had sitting around technically this is a work in progress, but it works great.things i might change-measure out holes so you do not have to use a drill.-make longer to fit some Matx boards