SLAB / Caliburn / TalonClaw 4 Hole Template (metric)

thingiverse

This is a center-punch / drill template for the aluminium bars used in the [Caliburn 4](https://www.thingiverse.com/thing:5078652), [Talon Claw 4](https://www.thingiverse.com/thing:5163389) and the [SLAB](https://github.com/Sillybutts/SLAB). Since i wanted to make the bars for he SLAB myself (importing too expensive), i had to know the exact position for drilling the screwholes. These hole-guides (based on the measurements provided by SillyButts [GitHub](https://github.com/Sillybutts/CaptainSlug-Bar-References), thank you very much sir), It simply clips onto the end of the aluminum bars; then you can either use a center-punch to start the holes or simply use a small drill to drill right through the template. The holes in the template are not the final diameter, just to get you started. Works surprisingly well... This also allows you to decide, which size threads you want to use, if any at all. The templates are marked (C4 / TC4), since the hole spacing is slightly different for each blaster. Please note: this is for the **metric version** (12mm) of the SLAB / C4 /TC4. The bars for the [imperial version](https://www.thingiverse.com/thing:5670342) are slightly wider (12.7mm)