skysvler

thingiverse

The following components are required for the BMW R1200RS axle camber adjustment: For the front left axle camber part, a Lintel component made from PLA + black material is necessary. This component must have a layer thickness of 0.15 mm and between four to five wall lines. The ideal printing temperature is 200 ° C / 60 ° C, with an optimal filling level of 80-90%. For the front right axle camber part, another Lintel component made from PLA + black material is required. This component must also have a layer thickness of 0.15 mm and between four to five wall lines. The ideal printing temperature is 200 ° C / 60 ° C, with an optimal filling level of 80-90%. In addition to the axle camber parts, several other components are needed for assembly: One piece of threaded rod with a diameter of M6 x 290 ± 2mm and a material designation of 8.8 NIRO is necessary. Galvanized threaded rods can also be used. Two self-locking nuts with a diameter of M6 DIN 985 NIRO are required for securing the axle camber parts in place. Finally, two washers made from ISO 7090-6-200 HV NIRO material are needed to provide additional support and stability during assembly.