Skylake delid tool

youmagine

!!!!You may Try out the Kaby-LAKE Delid tool as Skylake CPUs should also work with it !!!!!https://www.youmagine.com/designs/intel-kaby-lake-delid-tool A simple tool to remove the Heatspreader of your Skylake CPU. Tested with 6600K, 6700K, 4790K, G3258 (Skylake / Devils Canyon / Haswell). May also work some other Haswell/Broadwell/Devils Canyon 115x CPUs (Heatspreader with sharp corners, only partially tested). To use: print both parts, put some sort of rubber or foam on the inner bottom of the base. Put the CPU into the CPU-holder with the long PCB part looking over the end of the tray. Then put it in your vice and close it carefully. For enough strength, print at least with 3 perimeters and 30% infill! Use at Your own Risk! Only for CPUs who are glued and with thermal-paste, not for soldered CPUs. EDIT: Does Not Work with Ivybridge (If someone is able to try out Ivybridge (round Heatspreader corners), it would be cool to give a feedback if it works, as I don't have such a CPU for test). Donation: paypal.me/chriyoumagine